Removing TTR-50E Air Filter
How to remove the air filter from a TTR-50E.
Articles by "pw50"
Showing posts with label pw50. Show all posts
PW-50 Stiff Throttle
Here's a tip on how to fix a stiff throttle on a PW-50. My was complaining that his throttle was hard to twist on his bike so I took it apart and found dirt and gunk. Here is a step by step guide on how to fix a stiff throttle.
Step 1
Remove both Philips head bolts that holds both halves of the throttle assembly together.
Step 2
Remove throttle cable from throttle housing.
Step 3
Remove throttle housing from bar end.
Step 4
Use fine sandpaper to clean and polish handle bar end until smooth and shining.
Step 5
Use brake clean to clean handle bar end and the inside of throttle housing tube. Tip- use screw driver with a rag over it to clean inside the tube.
Step 6
Spray silicone on bar end before placing throttle tube back on.
Step 7
Reatatch throttle cable ensuring cable is in grove.
Step 8
Connect both halves of throttle assembly together and tighten both screws 90%.
Step 9
Push throttle housing against bar end then back off 1/8" to ensure housing tube is not rubbing against bar end.
Step 10
Tighten screws and gear up the kids.
Have a PW-50 tip of your own contact mark@usdualsports.com to have your tip published on Kids Corner.
Remember the easiest way to help support usdualsports is by clicking This Link to Amazon before every purchase and we get a small cut to pay website fees, server fees and the best part is it won't cost you a dime more.
Remember the easiest way to help support usdualsports is by clicking This Link to Amazon before every purchase and we get a small cut to pay website fees, server fees and the best part is it won't cost you a dime more.
Subscribe to:
Comments (Atom)
Support Our Sponsors
Show your support by clicking images below to check out their page.
