Having your dirt bike goggles fog up when riding is not only annoying, but also dangerous. In the past I have tried various methods to keep my goggles from fogging up. One being anti fog spray which does work, but also leaves a water like look on your lenses. Another trick I learned from my time as a swimmer in the Navy was plain tooth paste rubbed on the lenses, and then wiped off. This method works, but you have to be extremely careful because you can scratch your goggles very easily.
In my quest to find a way to deal with fogging I came across Haber Vision. They sell dirt bike goggles, and you can add their Eliminator Fan. The Eliminator fan is simple to use. Turn it on, and it has a sensor that measures the level of humidiy in your goggles. When the humidiy gets to a certin point the fan automatically turns on which eliminates the fogging issues. On the day that I tested them out, the first lap I rode with my old goggles, and when I stopped or was in a tight section my goggles fogged up like normal. On the second lap I broke out Haber Visions goggles, and about half way through I heard the fan kick on, and fogging was not an issue the rest of the day.
In my opinion, the best feature about the Eliminator Fan is it will work in almost all dirt bike goggles on the market. I tried it out on a few pair that I have, and it fit without any problem. One issue that has came up is the battery door can come open while riding, so I suggest placing a piece of tape over it to hold it in place. If you are in the market for a new set of goggles, or you want to get away from the common fogging issues check out Haber Vision.
Disclosure
*I was not financially compensated for this post. I received a sample for review purposes. The opinions are completely my own based on my experience.*
